EMT Practice Test

1. Question Content...

---

Question1: Client makes a Web request to a Web Server, and ProxySG is using ProxyAV in RESPMOD mode. Which devices are involved before the request reaches the original destination Web server?

Question2: When the Blue Coat Web Filter is enabled, the DRTR

Question3: What configuration of ProxySG can be created during web initial setup wizard? (Choose all that apply) (a) IP address or addresses, mask, gateway, DNS address or addresses
(b) and settings - and manager and backup manager
(c) password for web management Console and CLI enabled mode.

Question4: Which ProxySG technology uses the data processing pipeline similar to the one shown in the picture?

Question5: How can a user restore ProxySG back to its default, factory settings, so that its IP address etc. needs to be configured anew? (Choose all that apply)
(a) Press a button on ProxySG back panel (left arrow on front panel for some models) and hold it for about
5 seconds
(b) Enter a CLI command (restore-defaults factory-defaults) and confirm it with y(yes).
(c) Press a button in Management Console that drops the network configuration, and confirm the warning dialog.

Question6: A ProxySG is designed to do which of the following? (Choose all that apply) (a) Enhance security through authentication, virus scanning, and logging.
(b) Increase performance through TCP optimization, HTTP caching and pipelining.
(c) Control content with URL filtering, content stripping, and HTTP header analysis.

Question7: Which of these is equivalent to the following IPv6 address?
fe80::2d0:83ff:fe04:9c9e

Question8: The ProxySG acts as both an ICAP client and ICAP server.

Question9: Which types of requests are likely to be served the fastest?

Question10: In a user-defined exception created on the ProxySG, what is the default HTTP response code?

Question11: What does the Blue Coat WebFilter do to classify sites not found in the WebFilter on-box database?

Question12: What is returned to the HTTP request" GET / HTTP/ 1.1 "?

Question13: An administrator created a PIN for the ProxySG front panel, disabled the built-in administrative account and introduced policy-based admin authoritarian, and secured die serial port. After this was done, all the PINs, passwords and policy settings were lost. What options are available to regain access to the appliance? (Choose all that apply)
(a) Return ProxySG appliance to Blue Coat to restore a default SGCS image (b) Restore the factory settings by pressing and holding a reset button for 5 seconds, configure the appliance anew or restore its configuration from a backup
(c) Try out all 10000 combinations of PIN for the front panel until you find the right one (d) Remove the hard disk from the ProxySG, connect it as an external SAT A disk to any Windows or Linux computer; clear the admin entry in the /etc/ pssswd file on that disk. Put the hard disk back in ProxySG, start it up and reset the admin's password.

Question14: Which appliance does not need any licensing and is fully operable after deployment?

Question15: Which of the following tracks client-server requests and server responses?

Question16: By default, what log format is associated with the main log facility?

Question17: Why does the Internal HTTP proxy service use the TCP Tunnel proxy by default?

Question18: Which statements are true about the Blue Coat WebFilter? (Choose all that apply) (a) A single web site can belong to multiple categories
(b) Embedded images and objects may be denied, even though the container page is allowed.
(c) WebFilter on-box database can be used in conjunction with a third party content database (d) WebFilter on-box database updates are Web downloads

Question19: Can server initiate an HTTP transaction?

Question20: Which statement is true about a ProxySG with factory settings:

Question21: To implement ProxySG as a default gateway, which of the following options has to be enabled?

Question22: The HTTP request from a client to a proxy uses addresses as shown in the picture. It follows that the ProxySG serves as transparent proxy.

Question23: WebPulse uses URL information from which of these Blue Coat products? (Select all that apply)

Question24: What are the types of challenges that can be authenticated by ProxySG? (Choose all that apply) (a) Administrator attempts to access Management console
(b) user attempts to access the internet
(c) Administrator attempts to access SG via SSH
(d) User attempts to access a CIFS file server

Question25: Reporter creates reports that can be saved in the following formats (choose all that apply) (a) CSV (comma-separated-values) to be opened by Excel
(b) Adobe PDF
(c) HTML
(d) XML

Question26: Proxy servers and firewalls are network security devices that________

Question27: HTTP/1.1 supports pipelining - multiple related requests are written to a single TCP socket without waiting for the responses to come back - i.e. the requests are done asynchronously in-parallel, instead of doing them sequentially as usual (see picture). Some Web clients such as Opera and Firefox with FasterFox plugin use HTTP pipelining. Assume that ProxySG Is deployed as a forward proxy listening on port 8080.

Question28: If an error occurs during Proxy AV request or response processing, which of the following will occur?

Question29: Which HTTP error code corresponds to the ProxySG default exception identifier dns_unresolved_hostname?

Question30: When the ProxySG 200's power LED indicator alternates between green and amber, it means that the system is booting.

Question31: Which option is NOT available to upload logfiles from ProxySG?

Question32: Which WAN Optimization features require at least two ProxySG appliances to work? (Check all that apply) (a) Protocol Optimization
(b) Object Caching
(c) Byte Caching
(d) Application Delivery Network (ADN)

Question33: What is the default time to cache authentication credentials in ProxySG for an authentication realm?

Question34: Persistent TCP connections are enabled by default starting with which version of HTTP?

Question35: When configured as part of an IPv6 network, how does the ProxySG gets its IPv6 address?

Question36: A single ProxySG appliance can act as a Gateway Proxy and WAN Acceleration Proxy at the same time.

Question37: If a proxy server is seen in the external Internet as Web server, it is a forward proxy.

Question38: When Proxy server settings in a browser are configured using WPAD (web Proxy Auto Discovery) protocol, what has to be specifically guaranteed to ensure security?

Question39: What are the two types of ProxySG exceptions?

Question40: Which HTTP error code corresponds to the ProxySG default exception identifier icap_error?

Question41: Which HTTP error code corresponds to the ProxySG default exception identifier authentication failed?

Question42: When WebFilter is enabled, how often does the ProxySG check for updates to the WebFilter database?

Question43: The following authentication realms will be used in a sequence realm. Which realm should go first?

Question44: Can you use IPv6 addressing on a ProxySG that communicates via WCCP with its router?

Question45: What optional features or licenses must you purchase to enable IPv6 support on the ProxySG?

Question46: The ProxySG operating system is based on________.

Question47: For the ProxySG to decrypt SSL traffic, does the traffic need to be intercepted by a proxy service?

Question48: From the viewpoint of the ProxySG, a user login consists of which three components? (Select 3)

Question49: Which of the following console services are enabled by default? (Choose all that apply) (a) HTTP port 8081
(b) HTTPS port 8082
(c) HTTPS port 8083
(d) SSH port 22

Question50: Which virus-scanning engine is NOT supported by ProxyAV?

Question51: How does a local authentication realm know what credentials to authenticate against?

Question52: All of the following are software based Blue Coat solutions:
Blue Coat Reporter, Blue Coat WebFilter, Blue Coat K9, ProxyClient

Question53: When the disk space on a ProxySG is 95% full, which of these features or functions become unavailable?
(Select all that apply)

Question54: If you set a service attribute on the ProxySG to "Reflect Client IP", what must you make sure is not going to happen in the network?

Question55: Coaching or splash pages have to be configured through CPL rather than VPM.

Question56: Why should ProxySG set HTTP proxy behavior profile to "portal" in a reverse proxy deployment? (Choose all that apply)
(a) To ensure ProxySG will ignore reload attempt.
(b) To only allow authenticated users that are allowed to browse the page.
(c) To ensure that ProxySG will trust server expiration header.
(d) To restrict client access by User-Agent type.

Question57: Which capabilities are limited in Blue coat Reporter standard edition compared to Enterprise edition?
(Choose all that apply)
(a)Data profile number is limited to five
(b)Reports can be displayed, but cannot be saved as PDF or CSV
(c)Only single processor is supported
(d)Report customization is limited

Question58: By looking at the above HTTP GET request, what are the possible proxySG deployment methods that could be in used? (Choose all that apply)
(a) Default Route
(b) WCCP
(c) PAC
(d) WPAD

Question59: If you create a configuration archive on a ProxySG, which of the following steps must you perform to restore that archive onto a different ProxySG? (Select all that apply)

Question60: By default, HTTP traffic that is logged is recorded to which log facility?

Question61: Which HTTP error code corresponds to the ProxySG default exception identifier policy_denied?

Question62: In SGOS 5.3, what are the two versions that you can opt for? (Choose all that apply) (a) Proxy Edition
(b) Full Edition
(c)WAN Opt Edition
(d) MACH5 Edition

Question63: You need to have an open service request (SR) with Technical Support to upload your ProxySG configuration information to Blue Coat directly from the Management Console.

Question64: What are the three principal physical deployment methods for the ProxySG? (Select 3)

Question65: In the VPM, source triggers can be used in conjunction with the ICAP RESPMOD action.

Question66: Which of the following types of traffic are scanned with ICAP RESPMOD?

Question67: A parent exception can provide the default values for a child exception.

Question68: What is WebPulse technology?

Question69: Access Denied (policy_denied)
Welcome. SUNNYVALE\student01i
Unfortunately, the "Adult/Mature Content" sites are not allowed.
To get the above custom message, how would you write the placeholder variables into an exception page?

Question70: What happens, if there are multiple listeners to the same TCP port, and destination IP address belongs to multiple IP address ranges?

Question71: How does the Management Console perform commands on the ProxySG?

Question72: After the initial boot-up. Blue Coat SGOS will automatically boot into a trial license. What is the duration of that period?

Question73: HTTP status codes requesting client authorization are 3-digit numbers of the following form:

Question74: Which of the following categorization method would incur additional costs (not covered by ProxySG and BCWF licenses)?

Question75: In a TCP connection, what will a listener service attempt to match before deciding to intercept or to bypass the connection? (Choose all that apply)
(a) Source IP
(b) Destination IP
(c) Destination Port
(d) Source Port

Question76: Which HTTP error code corresponds to the ProxySG default exception identifier authentication_failed?

Question77: What preconditions should be satisfied in order to do initial configuration from a client computer via the URL https://proxysg.bluecodt.com:8083? (choose all that apply)
(a) Client computer should be directly connected to ProxySG with a cross-over cable (b) ProxySG should have a pass-through card
(c) ProxySG should be deployed in the bridging mode

Question78: The default policy for ProxySG is DENY. Network administrator creates a VPM policy allowing access to some Web host only for certain users (see picture).
When installing this policy, ProxySG issues a warning that this rule will be ignored. What change can be applied in order to fix this?

Question79: Which of these proxy service components are responsible for detecting incoming traffic that matches specific IP addresses or subnets?

Question80: Which versions of SSL and TLS does the ProxySG support? (Select all that apply)

Question81: Some models of the ProxySG have a user limit. The user limit is based on which one of these factors?

Question82: In which type of physical deployment is a ProxySG out of path but still has potential visibility to all traffic through the use of a device such as a WCCP-capable router or a Layer 4 switch?

Question83: Which one of these statements is true about the factory default settings of a ProxySG?

Question84: What are the best practices using anti-virus software on a windows machine running Blue Coat Reporter?

Question85: What is the purpose of the VPM-XML file?

Question86: Name two different ways to create a transparent proxy environment.

Question87: When a ProxySG processes an SSL transaction between a client and a content server, does the ProxySG function as an SSL client or as an SSL server?

Question88: Which of the following policy tasks require using the VPM and cannot be performed in CPL? (Select all that apply)

Question89: If a proxy server is seen in the external Internet as Web server, it is a forward proxy.

Question90: Since which version the HTTP protocol has persistent TCP connections and Keep-alive headers?

Question91: A URL that is categorized by WebFilter can have how many applications associated with it?

Question92: When a ProxySG is being used as an IPv4-to-IPv6 gateway, how does the ProxySG determine the IPv6 address of the content server to which a client request should be directed?

Question93: For ProxyClient content filtering to work, the client's computer should be able to do a correct lookup of DNS address sp.cwfservice.net.

Question94: If an access log file has no header, how does Blue Coat Reporter process the file?

Question95: ProxySG can provide all these services to IM clients - client authentication at a proxy, message reflection, policy enforcement and logging.

Question96: Which of the following methods is NOT appropriate for the initial setup for a ProxySG 2010 series?

Question97: When accessing default administrative account with the ProxySG Management Console, which one of these passwords is used?

Question98: If you do not enable authentication on the ProxySG, can you still write policy to control client access to web content?

Question99: Can you use the same ProxySG default gateway for both IPv4 and IPv6 addressing?

Question100: When using WebPulse with Blue Coat WebFilter, how can you determine the list of operations that can be associated with the application facebook?

Question101: Which one of the following categorization methods is not covered by ProxySG and Blue Coat WebFilter licenses and would incur additional costs?

Question102: Which of the following is true about enabling access logging? (Choose all that apply) (a) Access logging is disabled by default on newly configured systems.
(b) You can enable access logging through the Management Console only.
(c) You must configure the ProxySG to intercept protocols you wish to log.

Question103: When specifying a search user for an LDAP authentication realm, what administrative permissions are required on the search user account? (Select all that apply)

Question104: HTTP Access log format bcreportermain_vl includes the time of the request, URL requested, and MIME type of content, but does not include whether it is cache hit or miss.

Question105: Which attribute is used in authentication in a Microsoft Active Directory LDAP authentication realm?

Question106: Which of the following policies can be applied to Instant Messaging traffic? (Choose all that apply) (a) A policy to deny the transfer of specific file types or file sizes
(b) A policy to deny a specific IM request method
(c) A policy to deny a key word or words using a regular expression
(d) A policy to deny a specific IM buddy or IM chat room

Question107: Which best describes the role of a proxy server?

Question108: What acceleration techniques are NOT part of MACHS?

Question109: Which compression algorithm is used by ProxySG during WAN acceleration?

Question110: You CANNOT create custom log formats.

Question111: When does the ProxySG require the use of BCAAA with an IWA realm?

Question112: What categories are included in Blue Coat WebFilter on-box database and recognized by the WebPulse dynamic categorization?

Question113: What do you need to enable NTLM authentication?

Question114: What ProxySG appliance has these default settings?
(a) Default policy is ALLOW
(b) Trust client destination IP is ON
(c) Tolerate HTTP errors is ON;

Question115: In WebPulse, does background analysis of URLs use human raters?

Question116: What service group does Blue Coat recommend for the Telnet service?

Question117: Which of the following tracks client-server transactions going through the ProxySG?

Question118: When the DRTR successfully categorizes a site, the site is_________ (Choose all that apply) (a) Added to the static BCWF database on the ProxySG
(b) Added to the local database on the ProxySG
(c) Added to the DRTR database on the ProxySG
(d) Added to a DRTR cache that resides on the ProxySG

Question119: Which function is NOT a characteristic feature of proxy servers?

Question120: What is the behavior of content filtering policies, when the Blue Coat WebFilter license expires?

Question121: What are the possible configurable options when configuring destination address in proxy services?
(Choose all that apply)
(a) All
(b) Any
(c) Explicit
(d) Transparent

Question122: How frequent are updates of WebFilter on-box database within the ProxySG?

Question123: Notify user objects utilize cookies and http redirection to deliver error messages to clients.

Question124: When a proxy service listener matches incoming client traffic and is set to Bypass, what happens to the traffic?

Question125: What kind of object should be selected from button New in the New Action dialogue in the VPM that returns a coaching or splash page?

Question126: Core vs. edge deployment refers to ProxySG appliance being located closer to the servers vs. closer to the clients.

Question127: The Connect HTTP method is reserved for use with a proxy that can dynamically switch to being a tunnel (e.g. SSL tunneling)

Question128: The goal of creating and using Notify User objects is (Choose all that apply) (a) to deny access to a URL
(b) to deliver a splash page to the clients
(c) to warn a user before allowing access to a URL

Question129: It is possible to upgrade the version of ProxyClient installation on a ProxySG without upgrading its SGOS version.

Question130: What acceleration techniques are NOT used for ProxySG WAN Acceleration?

Question131: Which is NOT a support- related site for Blue Coat products?

Question132: What is in NTLM Type 2 Message?

Question133: On the ProxySG, can more than one authentication realm be active at any given time?

Question134: What are 'unmanaged endpoints" which make the ProxyRA appliance useful?

Question135: ProxySG uses a licensed Blue Coat Web Filter (BCWF), and has configured policies for URL categories.
ProxySG uses a DNS server, which for some reason cannot resolve the domain name sp.cwfservice.net anymore. What happens to the content filtering policy evaluation in this case?

Question136: Forward proxy of SSL allows applying policies to encrypted SSL data.

Question137: After a URL has been categorized by the WebPulse background rating service, when are the results returned to the ProxySG that initiated the request? (Select all that apply)

Question138: Which of the following are trigger objects in the Visual Policy Management? (Choose all that apply) (a) Source Address
(b) Destination Address
(c) Time
(d) Tracking

Question139: Can proxy servers modify traffic between a client and server?

Question140: Assume explicit proxy deployment where LDAP authentication realm is used. Authentication mode value is auto. What is the first response code that a client receives as it attempts to connect to the Internet for the first time?

Question141: From where does the exception exception.user-defined.all inherit its properties?

Question142: The ProxySG can create configurable access logs for FTP, HTTP, and Telnet but not for Peer-to-Peer or Real Media

Question143: In the VPM, what type of object is a Notify User object?

Question144: Which statement is true about language support for Blue Coat WebFilter on-box database and Dynamic Categorization technologies?

Question145: The ProxySG gives you the ability to write policies through.

Question146: What happens, if ProxyClient is deployed in a place that does not match any conditions in the Location Awareness?

Question147: Which option is NOT available to upload logfiles from ProxySG?

Question148: Which of the following policies CANNOT be implemented on the ProxyAV? (Choose all that apply) (a) Blocking viruses, worms, spyware and trojans
(b) Blocking file types using apparent data type (file signature)
(c) Blocking files that exceed a size limit set by the administrator
(d) Blocking password protected archive files

Question149: In NTLM authentication, passwords are normally transmitted in which of these ways?

Question150: Which streaming services are supported by ProxySG?

Question151: Which software product provides Web content filtering for windows and Mac OS computers, is locally configurable, and can produce a barking sound, when user violates a filtering policy.

Question152: What is the name of the Technical SupportWeb site where service requests can be reported?

Question153: Which of the following statements are true? (Choose all that apply)
(a) Exceptions and notifications can be configured to use specific HTTP response codes.
(b) Exceptions and notify user objects can be created through the VPM.
(c) Exceptions and notify user objects can be utilized as action objects in the VPM.
(d) Exceptions and notify user objects can include substitutions such as the IP address, username or category.

Question154: What are "unmanaged endpoints' which make the Blue Coat RA (Remote Access) appliance useful?

Question155: Which Instant Messaging proxies are available on the ProxySG? (Choose all that apply) (a) AIM
(b) Jabber
(c) MSN
(d) Yahoo

Question156: Find the configuration or management activity that is NOT among the functions of the Blue Coat Director CANNOT be used?

Question157: The ProxySG allows you to upload compressed access logs or plain-text access logs.

Question158: What changes, when FIPS mode for Management Console is enabled?

Question159: If the ProxySG is not receiving any power, how does the Management Console indicate this?

Question160: ProxySG has to be deployed inline (in bridging mode) or virtually inline (using WCCP or an L4 switch) in order to block IM traffic.

Question161: How many different anti-virus scanning engines can you run simultaneously on a ProxyAV?

Question162: When accessing Management Console from the Web, the built in admin account uses the regular password of CLI access (NOT the enable password of admin account)

Question163: Which of the following are true about the rules processing in the VPM? (Choose all that apply) (a) Rules are processed in a top down sequence.
(b) Layers are processed from left to right regardless of type.
(c) Layers are processed according to layer type.
(d) Layers of the same type are processed from left to right.

Question164: What is true immediately after the initial setup of ProxySG?

Question165: What ICAP refers to?

Question166: Which one of these statements best describes the role of a proxy server?

Question167: What are the best practices using anti-virus software on a windows machine running Blue Coat Reporter?

Question168: What happens to ProxySG logging, when uploading them to a remote FTP server becomes impossible?

Question169: In a transparent ProxySG deployment, the TCP packet sent from the client to the ProxySG contains what value as the destination IP address?

Question170: Which of the following access logging features are supported by the ProxySG? (Select 4)

Question171: Can you have more than one Web Access layer active in the VPM at any given time?

Question172: If the VPM displays two Web Access layers, which one is evaluated first?

Question173: Can you change from the Proxy Edition to the MACH5 Edition of SGOS?

Question174: The bcreportermain_vl access log format has a configurable ordering of fields, and this custom order is reflected in a log file header.

Question175: What happens, when administrator makes some changes in ProxySG Management Console and presses Revert button two times?

Question176: Management Console of ProxySG (SGOS v. 5.4- or earlier) is based on the following client-side technology:

Question177: You can obtain support information without contacting anyone from Blue Coat support via Blue Coat's online tool, Instant Support.

Question178: Which layer can be used to block a particular URL?

Question179: Which of the following tasks could be performed from the Blue Coat Management Console? (Choose all that apply)
(a) SG Initial Setup
(b) Authentication Realm Configuration
(c) Bandwidth Class Configuration
(d) Resetting Trial Period

Question180: Which of the following is a free software based Blue Coat product for home users?

Question181: A single ProxySG appliance can act as a Gateway Proxy and WAN Acceleration Proxy at the same time.

Question182: Which HTTP error code corresponds to the ProxySG default exception identifier icap_error?

Question183: Various models of ProxySG (e.g. 810-5 and 810-10) have different user limits. What is a user limit?

Question184: Which proxy service matches incoming traffic if it does not match any other service?

Question185: How can you prevent passwords from being sent in plaintext between the ProxySG and an LDAP server?

Question186: When using transparent authentication, which of the following statements is true?

Question187: To implement ProxySG as a default gateway, which of the following options has to be enabled?

Question188: In exception hierarchy exception myexreption is child of Exception. User-defined.all. This means that the value for all parameters (format, contact, summary, http code, etc.) are copied from Exception.User- defined.al settings to myexception unless these values are explicity overriden.

Question189: Can ProxySG services configure multiple listeners on the same TCP port?

Question190: Blue coat Director functions include the following (Choose all that apply) (a) Provide centralized initial setup and policy management
(b) Configure secure gateway and WAN acceleration
(c) Monitor hardware and software metrics and events on ProxySG appliances (d) Enable proxying and filtering of multicast UDP traffic

Question191: Which group of services does not have a specialized proxy and is handled by TCP Tunnel instead?

Question192: Use of the Flash streaming proxy requires the installation of an optional license.

Question193: If the DRTR is enabled in real time, but does not have categorization value for the requested URL?

Question194: Which is NOT a good reason to configure user authentication when deploying ProxySG as an Internet gateway proxy?

Question195: How many content filtering databases can be used in a policy for SGOS 5.3 at the same time (apart from the local database and IWF restricted categories)?

Question196: By looking at the above HTTP GET request, what are the possible ProxySG deployment methods that could be in used? (Choose all that apply)
(a) Default Route
(b) WCCP
(c) PAC
(d) WPAD

Question197: Which of the following Authentication Realms are supported by Blue Coat in SGOS 5.3? (Choose all that apply)
(a) IWA
(b) RADIUS
(C) LDAP
(d) TACACS+

Question198: Which of the following authentication realms are supported in SGOS version 6.2?
(Select all that apply)

Question199: The ProxySG ICAP implementation is fully compatible with which of the following applications? (Choose all that apply)
(a) Finjan SurfinGate
(b) Webwasher
(c) Antivirus Scan Engine (SAVSE)
(d) Trend Micro InterScan

Question200: Which protocol and port is used by Blue Coat Reporter service to display results?

Question201: ProxyAV 1400 and 2400 are more powerful than other models by the following criteria. (Select 3)

Question202: Can a ProxySG automatically get its own IPv4 address during initial configuration?

Question203: If Proxy SG acts as a Web proxy, does the Origin Content Server (OCS) see the client's IP address or the proxy server's IP address?

Question204: ICAP responses may be cached on a ProxySG, i.e. for some Web requests ICAP processing may be completed without involving ProxyAV?

Question205: Which of the following parts of a URL are NOT case-sensitive? (Select all that apply)

Question206: The ProxySG acts as both an ICAP client and ICAP server.

Question207: When virus scanning functionality is enabled, ProxySG acts as an ICAP server, and ProxyAV as an ICAP client.

Question208: ProxySG has its explicit HTTP service set to intercept with the default settings. An LDAP authentication realm is used, authentication mode value is auto. What is the first response code that a client receives as it connects to the Internet for the first time?

Question209: What can be concluded about this request processing order?

Question210: In which of the following ways can Access Logging be enabled? (Choose all that apply) (a) By a CLI command
(b) In the Management Console under Access Logging
(c) By adding another layer to VPM policy

Question211: Which of the following types of traffic are not scanned with ICAP REQMOD?

Question212: Is Management Console accessible over HTTP?

Question213: In an explicit ProxySG deployment, the TCP packet sent from the client to the ProxySG contains what value as the destination IP address?

Question214: Which of the following statements are true about WCCP? (Choose all that apply) (a) WCCP version 1 only redirects traffic based on TCP destination port 80 while WCCP version 2 can redirect more than just port 80.
(b) WCCP version 1 supports only single proxy while WCCP version 2 can support up to 32 proxies in a single service group.
(c) WCCP version 1 is the default version supported by ProxySG unless configured otherwise.
(d) WCCP version 2 is more suitable for multiple router deployment as it allows multicast discovery.

Question215: HTTP response typically contains headers and the body (data). Does HTTP request contain body (data)?

Question216: Consider an inline deployment - see figure.
Assume that a browser on Client0l is configured to use SG01 as an explicit proxy on port 8080.
The only service on SG01 set to Intercept is the HTTP service on port 8080 for the <Transparent> destination address. Default policy is ALLOW and there is no custom policy.
What will the user see in the browser window after requesting a Web page?

Question217: What client-side technology does the Management Console use?

Question218: The placeholder variables that are available in ProxyClient's exception templates (i.e. the screens that are displayed, when there is a policy violation) are the same ones that are available for user-defined exceptions within ProxySG.

Question219: When using the ProxySG to send information related to a service request, which of these items can the ProxySG transmit to Blue Coat? (Select all that apply)

Question220: What are the two hardware chassis options that are available in Blue Coat Director? (Choose all that apply)
(a) SG210
(b) SG510
(c) SG800
(d) SG8100

Question221: Which of the following types of traffic are scanned with ICAP RESPMOD?

Question222: A policy configured in VPM contains several Web Access layers, each contains several rules. Where a policy rule should be placed to ensure that it is always invoked and its action (e.g. ALLOW or DENY) is not overridden by any other rule?

Question223: User with administrative rights can stop ProxyClient as a Windows service.

Question224: The SSL certificate returned by the Management Console upon HTTPS access____.

Question225: Which statement is not true?

Question226: Which are the two packets that are used in WCCP discovery process? (Choose all that apply) (a) HERE_I_AM
(b) HOME_ROUTER_IP:
(c) I_SEE_YOU
(d) WEB_CACHE_HERE

Question227: How are entries in the ProxySG event log classified?

Question228: True or false: Blue Coat Director cannot be used to configure a ProxySG until an IP address has been assigned to the ProxySG by either the front panel or the serial console.

Question229: Licensing of the Proxy AV is done through the ProxySG interface.

Question230: In which client connection type are user agents aware that a proxy has been deployed?

Question231: What are requirements for client's browser for notification and coaching pages to work properly?